Union Ink

Mixopake Fluorescent Flame Orange - Quart

$64.00
Current stock: 0
Description

Description

The Mixopake series colour mixing system is designed with the most advanced technology and formulated with state-of-the-art raw materials to provide the best printing of opaque plastisol in the industry. Using the Mixopake formula guide will enable you to match any specific shade or colour in the Pantone mixing system. Take a specific pantone numbered colour and re-create it with a formula that uses the standard Mixopake colours.

CURING:

Plastisol inks will not air dry. They must be heat cured. Normal plastisols will fully cure and withstand repeated washings when the entire ink deposit reaches 300F (149C). Curing can be accomplished with the use of a conveyor dryer, flash curing or infrared heaters. Because Maxopake inks are often printed through coarse meshes, the resulting heavier deposits may require longer oven time or possibly higher temperature than normal.

STORAGE:

Store plastisol at room temperature. Prolonged exposure to high temperature can cause the viscosity of any plastisol to increase.

WASHABILITY:

Excellent. Dry-Cleaning is not recommended. Imprinted parts of garments should not be ironed.

Contact us if you would like a colour chart.

Ships from Canada.  The Screen Print Store.ca is Canada's source for screenprint ink, screen print supplies, screenprinting equipment and all your silkscreen needs.

Reviews

Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

Weight:
4.00 LBS
Width
5.00
Height
5.00
Depth
5.00
Shipping:
Calculated at Checkout