Pink Stuff Abraider Degreaser and Dehazer Quart
This product is a vicious dehazer and degreaser that is designed for a variety of inks. The Pink Stuff cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers. The Pink Stuff leaves your fabric free of all oils and contaminants, which will reduce the incidence of pinholes.
1. Before using, remove all ink residue and emulsion from the screen.
2. Brush product on the ink side of a WET screen. Agitate on both sides of the screen with a brush or pad and set aside for approximately 1 to 10 minutes.
3. High pressure water rinse, spraying from the bottom to top, on the print side of the screen. Reverse screen and high pressure rinse, then use low pressure water and flood rinse the complete screen. Allow screen to dry before coating.
Ships from Canada. The Screen Print Store.ca is Canada's source for screenprint ink, screen print supplies, screenprinting equipment and all your silkscreen needs.
Be the first to review this product.
- 5.00 LBS
- Calculated at Checkout