D-1000 Vastex Conveyor Dryer

Current stock: 0


With a 26 in. (66 cm) wide by 46 in. (116.8 cm) long conveyor belt, the D-1000 Compact Infrared Conveyor is sized to accommodate wider jackets and sweats, and wider printed images, than a Vastex sub-compact D-100 Conveyor Dryer with 18 in. (46 cm) wide belt. An available 10 in. (25.4 cm) front conveyor extension increases the standard infeed of 15 in. (38.1 cm) to 25 in. (63.5 cm) for loading of heavier and larger garments.

At 46 in. (116.8 cm) long and 32 in. (81.3 cm) wide overall, the unit fits on tabletops or on utility carts with tops as small as 30 in. (76.2 cm) square, and is available with an optional S-100 mobile stand shown at right. It is also suitable for mobile screen printers to power on site using a small

generator at fairs, concerts, trade shows and other events where larger garments as well as tees may be screen printed.

It is available in 120V or 240V models equipped with a 20 in. (50.8 cm) wide by 16 in. (40.6 cm) long, 2050 watt heater that carries the same 15-year warranty as all Vastex infrared heaters.

Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to ink type, ink coverage, desired cure temperature, and rate at which items are being printed.

The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber according to the thickness of printed garments and/or the angle of printed images on irregularly shaped items, for uniform curing of the printed area using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.

  • SMART 26" (66 cm) wide Teflon coated fiberglass belt with tracking system
  • ADJUSTABLE Speed, temperature, heater height and tilt
  • FAST 110+* shirts per hour with plastisol and 50+* with discharge
  • PRECISE Powerful infrared heater with tight coil pattern and heat shields
  • VALUABLE Best warranty, high quality, exceptional service
  • COMPACT Total footprint is about 10 sq.ft
  • (3 sq.m)
  • OPTIONAL 10" front conveyor extension


Heater 16" x 20" (40.64 x 50.8 cm)
Wattage 2,050 watts (2.050 kW)
Belt Width / Conveyor Length 26" (66 cm) x 46" (1.17 m)
Power Requirements 120V, NEMA 5-20P, 16.5A
240V, NEMA or International plugs, 8.2A
Chamber (tunnel) Length 18" (45.7cm)
Cure Speed — Plastisol 110/hr*
Cure Speed — Discharge 50/hr*
Assembled Dimensions 46" x 32" x 24" (119 x 81 x 61 cm)

*Cure times are 25% below actual test results. Production may vary based on ink, environment and other variables.
**Standard shipping weight and dimensions. Will change with optional assembly.

Product Brochure

D-1000 Website


Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

65.00 LBS
Calculated at Checkout