Vastex

EconoRed I Series Vastex Conveyor Dryer

Contact us at 1-800-663-4657 to order

Current stock: 0
Description

Description

EconoRed-I compact production dryers are an excellent choice for small- to medium-sized shops that need to cure/dry a maximum of 190 or 380* pieces/hr/chamber of textiles screen printed with plastisol, water-based and discharge inks. EconoRed I dryers are offered in two, 240V models, both with 66 in. (167.6 cm) belt length, and major improvements as standard equipment for 2013.

First is an EconoRed I 30 with a 30 in. (76.2 cm) wide belt and new 4300 watt heater (up from 3500 watts) capable of curing 190+ pieces per hour per chamber.

Second is an EconoRed I 54 with a 54 in. (137 cm) wide belt and two new 4300 watt heaters (total 8600 watts — up from 7000 watts) capable of curing 380+ pieces per hour per chamber.

For 2013, all EconoRed I dryers are also equipped with an Exhaust System that cools the outer cabinet while evacuating moisture and fumes; and a Digital Readout that displays DC volts, allowing you to accurately repeat or fine-tune drying results at any future time.

Starting at $3267.00USD
  • RELIABLE 15 Year Heater Warranty

  • HEAVY DUTY "X-Series" Conveyor Belt Tracking System with 30" (76 cm) or 54" (137 cm) Teflon coated fiberglass belt

  • CONSISTENT DC belt speed motor with digital voltage display

  • PRECISE Infrared Focusing System
  • ADJUSTABLE 2" - 7" (5 - 17.7 cm) belt-to-heater height adjustment

  • ACCURATE Digital PID Temperature controller is accurate to +/-1°F

  • EXPANDABLE Add 20" (51 cm) chambers and/or 18" (46 cm) belt extensions

  • WIDE EC-I-54 has a 54" extra wide belt allows for "All-Over" Prints to cure in single pass


 

*Production speeds are estimates and will vary depending on ink
manufacturer, humidity of shop, and other variables.

OPTIONS

  • Additional chambers can in 20" (51cm) increments
  • Belt extensions in 18" (46cm) increments
  • Scrub Air forced hot air
  • Heavy Duty belt motor (recommended for longer conveyors)
  • Low friction belt aligner
  • Hat support rail
  • Locking casters for easy mobility

 
TECHNICAL SPECIFICATIONSEconoRedI30EconoRedI54
Heater Warranty 15 year 15 year
Defect Warranty 3 year 3 year
Cure times** 190+ plastisol shirts/hr 380+ plastisol shirts/hr
Belt Speed 0-12 FPM (0-3.6 MPM) 0-12 FPM (0-3.6 MPM)
Internal Parts Material
(Heat Resistant)
Aluminum coated steel Aluminum coated steel
Overall Length 66" (168 cm) 66" (168 cm)
Overall Width 43" (109 cm) 67" (170.2 cm)
Overall Height 46" (117 cm) 46" (117 cm)
Belt Width 30" (76 cm) 54" (137.2 cm)
Chamber Length 20" (51 cm) 20" (51 cm)
Chamber Infeed Width 34.5" (88 cm) 58.5" (149 cm)
Chamber Infeed Height
(adjustable)
2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm)
Heater Size 18" x 24" (46 x 61 cm) 2 @ 18" x 24" (46 x 61 cm)
Heat Range (@ Heater) 0-800° F (0-427° C) @ 240V 0-800° F (0-427° C) @ 240V
Heater Wattage 4,300w (1 x 3,500) 8,600w (2 x 3,500)
Electrical Power***
(3 Phase available)
240V / 19A / 1 Phase / 3 wire 50/60HZ
(3 wire = 2 hot - 1 ground)
240V / 37A / 1 Phase / 3 wire 50/60HZ
(3 wire = 2 hot - 1 ground)
Shipping Weight**** 378 lbs (172 kg) 581 lbs (264 kg)
Shipping Dimensions**** 33" x 48" x 40"
(84 x 122 x 102 cm)
73" x 33" x 39"
(185 x 84 x 99 cm)

 ** Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc..
*** Wire and plug not included. Terminal block provided for on-site electrical hookup. Must adhere to local regulations. Consult licensed electrician.
**** All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications.

Produce Brochure

EconoRed I Website

Reviews

Reviews (0)

Be the first to review this product.
Additional Info

Additional Info

Weight:
408.00 LBS
Width
38.00
Height
48.00
Depth
41.00